Testing a Fan Relay on a 2000 Jeep Grand Cherokee
April 17, 2011 Updated: December 18, 2022 By: Abraham Torres-Arredondo Article ID: 268
This tutorial will assist you to diagnose the Impulse Width Modulated (PWM) fan electrical relay connected the 1999-2003 Jeep 4.0L Grand Cherokee SUVs and/operating theater the codes P1491 (Radiator Fan Control Relay Circuit).
The dealer, at the clock time of this writing, will turn on you $95 (The States) to diagnose it. Only if you have more time than money, you bottom easily diagnose it yourself, and I'll show you how.
Testing the fan relay is easy, the hardest part is getting to that, since Jeep altogether its wisdom, located the fan electrical relay behind the right side (passenger pull) of the front bumper and you'll probably have to remove it to access it.
You can pay Jeep an weapon and a wooden leg to do it, or you rear, with my supporte, diagnose and repair the issue yourself, save that money and spend it along something like tools.
You tin can find this tutorial in Spanish here: Cómo Probar El Relé PWM del Ventilador (4.0L Jeep) (at: autotecnico-online.com).
APPLIES TO: This tutorial applies to the favourable vehicles:
- 1999, 2000, 2001, 2002, 2003 4.0L Jeep 1000 Cherokee.
RELATED WIRING DIAGRAM:
- Radiator Fan Motor Circuit Wiring Plot (1999-2003 4.0L Jeep Grand Cherokee).
Important Tips
TIP 1: The way I've designed the Jeep PWM fan relay test, you'll need a scan creature that can read live data (not a code reader), since you'll need to follow the engine's coolant temperature with it.
You do not need the Jeep factory rake instrument, just a generic CAT scan joyride that you prat buy out at your local auto parts store or online and a multimeter. Today depending on your level of 'painful experience', you hindquarters modify this test so that you can do it without a generic scan tool (and I leave this up to you).
TIP 2: It's precise primal that you start out with a cold locomotive. If you have a scan tool, control that the engine coolant temperature (Electroshock) value is under 190° F. If the engine has been running for an lengthy period, Lashkar-e-Tayyiba it cool down for about 1 hr or more.
TIP 3: Before you jump into the tests, take a look back at and read the intact article so that you'll know what the test is every around and what you'll need to ut.
TIP 4: The very first affair that you need to psychometric test/verify, is the fan. You need to physically see IT come on by directly applying 12 Volts to IT and if the fan efferent does come on, hard its amperage pass around (and I'll prove you how).
TIP 5: Also, you're not gonna' witness any 'remove and put back' type instruction manual since the clause is every about the diagnosing the electrical relay, not how to remove and supercede it. So you may have to buy a repair manual or do further research online.
Symptoms Of A Bad PWM Buff Relay
The almost obvious symptom of a high-risk PWM winnow relay is that your Jeep is gonna' overheat.
You'll besides see one surgery all of the following symptoms as the engine overheats:
- The electric radiator fan motor does non come along.
- Coolant sparkly extinct of the coolant reservoir.
- Temperature gauge on the instrument flock is maxing out.
- Check locomotive light (CEL) is on and:
- DTC P1491 stored in the computer's memory
If your Landrover overheats beyond a certain point, you take chances blowing the head gasket and/operating room corking the piston chamber point.
Thankfully, examination the PWM fan relay can be easily done right at home, without the need of taking it to the Jeep home.
Testing a Fan Relay on a 2000 Jeep Grand Cherokee
Source: https://troubleshootmyvehicle.com/jeep/4.0L/how-to-test-the-pwm-relay-1
Post a Comment for "Testing a Fan Relay on a 2000 Jeep Grand Cherokee"